U Power International provides generator sets with different ranges that depend in their choice on the best international brands engines with capacities and specifications that match the needs of customers and are suitable for work in the hot and dust areas.
UC SERIES
55-2500 kVA
UD SERIES
220-825 kVA
UJD SERIES
33-275 kVA
UP SERIES
15-2500 kVA
UVP SERIES
275-700 kVA
GASOLINE Generator Sets
These generating sets are made especially for small houses, walking installations, caravans, campings, hobby, etc.
Diesel generator is a combination of diesel engine and alternator for converting mechanical energy into electrical energy. Diesel engine used as propulsion motor working with diesel fuel and convert to chemical energy into mechanical energy. Electrical energy which produced from diesel generator controlled by fuses,
Choosing the right place for the generator to make a secure installation is the most important part of the installation process.
During the selection of an installation area for the generator, the following factors must be taken into consideration and necessary applications must be made
Generators can be placed on floors such as soil, building, steel construction, platform. Placing the generator set on concrete base is the most preferred application.
The concrete base must be designed to withstand the weight of the Generator set. The height should be 200-300 mm.
The purpose of the engine exhaust system is to move the exhaust smoke out of the room and reduce noise so as not to cause danger or disturbance. To reduce the noise level of the engine, a suitable exhaust silencer must be installed in the exhaust pipe.
Using clean and good quality fuel extends engine life and ensures safe operation. The use of prefilters between the engine fuel filters and the fuel transfer pump is appropriate.
The fuel feed to the diesel engine may be provided in the following forms.
The sets of generators are equipped with rubber dampers to reduce the vibration transmitted to the floor to the minimum level. These dampers are a group between the engine / alternator foot and the chassis, and another group between the chassis and the floor.
U Power Generators utilize generator control units that can be monitored remotely, programmable microprocessor, all measured values and alarm messages can be monitored and protected. Control systems enable the generator set to be operated, stopped, monitored for various values...
Transfer panels are used to control generators, and to reliably output power. For this, it is necessary that the generator set is in norms and capacities to meet the output power. In the panels of the generator sets that are automatically engaged, contactor, motor switch, etc. used.
Synchronous systems that are created by combining multiple smaller capacity generators for high power requirements. Synchronization system provides significant advantages when compared to a single generator of the same power. Due to high experince of U Power Generation systems for large powers that can work...
The category (Standby, Prime) in which the generator set can be operated on the label is specified.
Overrunning these operating conditions will cause the following problems;
Shortening engine life,
Engine overheating, Increase in motor abrasion,
Overheating of alternator windings, formation of insulation weaknesses...
Like many types of rotating machinery, reciprocating engine-powered generator sets produce noise and vibration. Whether these generator sets run continuously in prime power applications or only occasionally in standby applications, their operating sound levels often must be reduced.